Part number FCPRHA15950622-5
FCP Engineering H-beam steel connecting rods kit (5 pcs.) 159mm
Audi S2, S4, S6, RS2, 200, Quattro - 2.5 2.6 20V Stroker
Product detailed specification
Manufacturer: FCP EngineeringPart number: FCPPASTR815085/5
Manufacturer: FCP Engineering
Forged high performance pistons for various applications in nearly all engine types for racing and street use.
Made of 4032-T6, piston skirt is molibden coated.
Each set of pistons also includes rings and HD series pins.
Bore size: 81.50mm
Compression ratio (CR): 8.5:1
Compression height: 29.00 mm
Pin diameter: 22mm
Stroke: 95.50mm with 236mm diesel engine block
Audi 200, S2, RS2, S4, S6 - 2.2 2.5 20V Turbo
Connecting rod length must be 159mm
Part number starting with 330 |
|
Athena advantages |
|
Reinforced material |
Asbestos free composite raw material OE approved |
Stainless steel ring (AISI304) |
Separate stainless steel rings assure maximum sealing around cylinder bore also on NOS and/or turbo charged engine where boost is over 2 bars. No head and block machining required |
Silicon beading |
Silicon-based beading is applied on critical areas to improve sealing around all cooling water and oil passages |
Part number starting with 330 |
|
Athena advantages |
|
Reinforced material |
Asbestos free composite raw material OE approved |
Stainless steel ring (AISI304) |
Separate stainless steel rings assure maximum sealing around cylinder bore also on NOS and/or turbo charged engine where boost is over 2 bars. No head and block machining required |
Silicon beading |
Silicon-based beading is applied on critical areas to improve sealing around all cooling water and oil passages |
Connecting rod length must 159mm
Position | 1,2,3,4,5,6 | ||||||
---|---|---|---|---|---|---|---|
Pairs & PN |
|
||||||
Quantity | 6 | ||||||
Crankshaft | 57.978 / 57.958 | ||||||
Housing | 63.000 / 63.017 | ||||||
Max Wall | 2.499 | ||||||
Max Length | 18.471 |